Replaceable insert type safety chucks with 90° entry angle have the same capacity as the Mill C type but when the pocket does wear out only the insert needs to be replaced.
Shafted Only half of a set. Has a drive shaft for mounting a brake or clutch. Does not include the unshafted side.
Safety Chuck with shaft, Foot Mounted, 170-230 series, 180mm square pocket with replaceable inserts in square and face.
150mm dia. x 195mm long shaft with partial length off shaft keyway starting 45mm from face, 36mm wide x 150mm long x 15mm deep with open / close SMC Pneumatic Cylinders CDS1L160-250 installed. Bearings to be sealed with rubber/plastic for dusty environment.
Revised 3/27/2018 by HT:
The face plate on the B-9793 chucks is 10mm thick.
Extend the top wear plate to the front of the face plate on the B-9793 chucks.
Revised 5/13/2016 by TR: added "Bearings to be sealed with rubber/plastic for dusty environment."
| Capacities | |
| Max Roll Weight Each | 141,096# [64,000kg] |
| Maximum Torque Shafted Side | 30,240.0 ft·lbs (362,880.5 in·lbs) [4,180.8kg-m] [41,000N-m] |
| Dimensions | |
| Drawing | Contact us |
| 3D Model | Contact us |
| Features | |
Entry Angle |
90° |
| Replaceable Insert | Yes |
| Sliding Adjustment | No |
| Installation | |
| Mounting | Foot |
Mounting Bolt Size |
see drawing |
| Mounting Bolt Distance |
see drawing |
| Winding Shaft Length Requirement |  |
| Alignment |  |
| Support | |
| Phone and email Support | |
| Warranty | |
| Replacement Parts | |
| Compare To | |
| JRC Web | NA |
| Boschert | STW 170-230-VT-1 |
| Condition | |
| Product Condition | |
Safety Chuck (B-9793)
- Brand: JRC Web Accessories Categories: - Shafted Side
- Part #: 503269
- Availability: Ships in 26 - 28 weeks from our factory in Fairfield, NJ USA
-
$41,200.00 Each